FSP150-50PL1-B - Sparkle Power FSP150-50PL1-B Power Supply. Flex ATX | 150 Watts...
Request Quote
For Price
- Part Number:
- FSP150-50PL1-B
- Model Number:
- FSP150-50PL1-B
- Make:
- SPARKLE POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
Sparkle Power FSP150-50PL1-B Power Supply. Flex ATX | 150 Watts | 90-265 VAC | +3.3V, +5V, +12V, -12V, +5Vsb Outputs Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 100% Hi-pot, ATE, and burn-in tested
- Active Power Factor Correction Meeting with EN61000-3-2
- Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
- Complied with Flex ATX standard
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- High efficiency and reliability
- Internal 12V DC fan included
- Low noise and ripple
- Noise Killer (Thermal fan speed control function)
- Output over voltage, short circuit, and over current protection
- Re-settable power shut down
- Remote On/Off function
Specifications
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Dimension (WxHxL): 81.5x40.5x150mm/3.2”x1.6”x6” inches
- Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
- Frequency: 47~63Hz
- Hold-up Time: 17ms minimum at nominal input voltage
- Humidity: 95% on operating and 95% on storage
- Input Current: 4A (RMS) @115V AC, 2A (RMS) @230V AC
- Input Range: 90~265V AC, Full Range Input
- Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
- Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
- MTBF: 100,000 hours on maximum load at +25°C degree
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL & CMOS compatible)
- Rise Time: Less than 20ms
- Temperature Range: Operating 0°C ~ +35°C on full load; storage & shipping -20°C ~ +80°C
Applications
- None Available
Aliases
- None Available