FSP250-60GTB - FSP250-60GTB Sparkle Power FSP250-60GTB - 250 Watts ATX12V Switching Power Supply

FSP250-60GTB - FSP250-60GTB Sparkle Power FSP250-60GTB - 250 Watts ATX12V Switching Power...

FSP250-60GTB Sparkle Power FSP250-60GTB - 250 Watts ATX12V Switching Power Supply Simple Type: 1U ATX Switching Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

100% Hi-pot, ATE, and burn-in tested
Active Power Factor Correction Meeting with EN61000-3-2
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO EN60950 (CB Report), CE
Complied with ATX and ATX12V standard
Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
High efficiency and reliability
Internal 12V DC 8cm fan included
Low noise and ripple
Noise Killer (Thermal fan speed control function)
Output over voltage, short circuit, and over current protection
Re-settable power shut down
Remote On/Off function

General

Dielectric Withstand: Input to frame ground 1800V AC for 1 second
Dimension (WxHxL): 150x86x140mm/5.9”x3.4”x5.5” inches
Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Frequency: 47~63Hz
Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Hold-up Time: 16ms minimum at 115V/60Hz and 20ms minimum at 230V/50Hz input voltage Power
Humidity: 90% on operating and 95% on storage
Input Current: 10A (RMS) @115V AC, 5A (RMS) @230V AC
Input Range: 90~264V AC, Full Range Input
Inrush Current: 60A Max for 264V AC Cold start
Leakage Current: Not exceed 3.5mA
MTBF: 100,000 hours on maximum load at +25° C degree
Rise Time: Less than 20ms
Temperature Range: Operating 0° C ~ +40° C on full load; storage & shipping -20° C ~ +65° C