FSP135-60PF - Sparkle Power FSP135-60PF Power Supply - 135 Watts Flex ATX Switching Power Supply

FSP135-60PF - Sparkle Power FSP135-60PF Power Supply - 135 Watts Flex ATX...

Sparkle Power FSP135-60PF Power Supply - 135 Watts Flex ATX Switching Power Supply Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

100% burn-in under high ambient temperature (50 degree C)
Approved by UL 1950, CSA 22.2 NO.234 Level 3, TUV EN60950 OR VDE EN60950, IEC 950, NEMKO EN 60950, CE
Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 Class 'B' 230 VAC operation
High efficiency
Internal 40mm 12 VDC fan provided
Low noise and ripple
MTBF above 100,000 hrs at 25 degree C
Output over voltage protection
Resettable power shut down
Short circuit protection on all outputs

General

90VAC~132VAC, 180~264VAC
Dielectric withstand: Input/output 1800 VAC for 1 second input to frame ground 1800 VAC for 1 second.
Efficiency: 68% Min., at full load
Frequency: 50Hz to 60Hz
Hold up time: 16ms minimum at full load & nominal input voltage.
Humidity: 90~95% RH
Input current: 4.0A(RMS) for 115 VAC, 2.0A(RMS) for 230 VAC
Output: 3.3V & +5V total output not exceed 80W
Over voltage Protection: +5V output: 5.58V min, 6.82V max; +3.3V output: 3.50V min, 4.50V max.
Overload protection: 150% Max.
Power good signal: Power on delay time 100 ms to 500 ms, power fail greater than or equal to 1 ms
Temperature range: operating 0 degree C~50 degree C; Non-operating: -20 degree C~80 degree C
Transient response: Output voltage returns in less than 1ms max. following a 25% load change.