FSP300-60PLN - Sparkle Power FSP300-60PLN Power Supply. 300 Watt

FSP300-60PLN - Sparkle Power FSP300-60PLN Power Supply. 300 Watt | ATX12V Switching...

Sparkle Power FSP300-60PLN Power Supply. 300 Watt | ATX12V Switching Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

100% Hi-pot, ATE, and burn-in tested
Active Power Factor Correction (PFC) meet EN61000-3-2
Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO EN60950-1 (CB Report), CE ,CCC,FCC,EMC
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
Complied with ATX and ATX12V standard
Complies with FCC part 15 subpart J class B, and CISPR 22 class B
High efficiency and reliability
Internal 12V DC fan included
Low noise and ripple
Noise Killer (thermal fan speed control function)
Output over voltage, short circuit, and over current protection
Re-settable power shut down
Remote ON/OFF function

General

Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
Dimensions (HxWxD): 86mm x 150mm x 140mm / 3.4" x 5.9" x 5.5"
Efficiency: min 78% @ 230 VAC & 754% @ 115 VAC main voltage & frequency with max load on all output
Frequency: 47~63 Hz
Hold-up Time: 17ms min at nominal input voltage
Humidity: 5~95% on operating & storage
Input Current: 4A (RMS) @ 115V AC, 2A (RMS) @ 230V AC
Input Range: 90~265V AC, Full Input Range
Inrush Current: No damage, typical 100A Max at cold start
Leakage Current: Less than 3.5mA @ 115V AC/60 Hz
MTBF: 100,000 hours at max load 25°C
Power Good Signal: Power on delay time 100ms to 500 ms, off delay 1ms min (TTL & COMS compatible)
Rise Time: Less than 20ms
Temperature: Operating:0°C~50°C onf full load; Storage:-20°C~80°C