FSP300GLCR-B204 - Sparkle Power FSP300GLCR-B204 Power Supply. 300 Watts ATX12V-2.01 | Switching Power Supply

FSP300GLCR-B204 - Sparkle Power FSP300GLCR-B204 Power Supply. 300 Watts ATX12V-2.01 | Switching...

Sparkle Power FSP300GLCR-B204 Power Supply. 300 Watts ATX12V-2.01 | Switching Power Supply | Active PFC and RoHS Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

100% Hi-pot, ATE, and burn-intested
Active Power factor correction (PFC) meet EN61000-3-2
Approved by UL60950, CSA C22.2, TUV or VDE, NEMKO (CB Report), IEC 60950-1 and CE
Complied with ATX and ATX12V standard
Complies with FCC part 15 subpart J class B and CISPR 22 Class B
High efficiency and reliability
Internal 12V DC fan included
Low noise and ripple
Noise Killer (Thermal fan speed control function)
Output over voltage, short circuit, and over current protection
Re-settable power shut down
Remote On/Off function

General

Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
Dimensions(WxHxL): 150mm x 86mm x 140mm (5.9"x3.4"x5.5")
Efficiency: min 78% at 230VAC & 75% at 115VAC; main voltage & frequency with max load on all output
Frequency: 47~63 Hz
Hold-up time: 17ms minimum at nominal input voltage
Humidity: Operating & Storage:5 to 95%
Input Current: 4A (RMS) @115V AC, 2A (RMS) @230VAC
Input Range: 90~265V AC, Full Input Range
Inrush Current: No damage, typical 100A Max at cold start
Leakage Current: Less than 3.5mA at 115V AC/60Hz
MTBF: 100,000 hour on maximum load @ 25°C
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1 ms minimum (TTL & CMOS compatible)
Rise time: less than 20ms
Temperature: Operating:0 to 50°C on full load; Storage